Pet

Having a pet around the house is always a great thing, especially when you have a big house and a backyard. Be it a dog or a cat or any other house animal, the companionship that a pet provides is truly unparalleled. And when you have a big house, it’s a great idea to give your pet the freedom it needs to move around the house and the backyard as and when it wishes. Pet doors make this extremely easy by eliminating the need for a person to repeatedly open doors for the pet to come in and go out.

A pet door is basically a panel in a wall or a normal door that opens both ways like a flap at a slight touch. Generally, a pet door has a hinge or a spring holding it together which makes it easy for the pet to push its way through it without using too much force. Because of the convenience, it offers, electronically controlled pet doors have also come into existence.

Installing a pet door in your wall or door is a fairly simple job and does not require excessive technical skills or tools. A hammer, jigsaw, drill, screwdriver, tape, level, scissors, and caulk are some of the essential tools required.

The first step to installing a pet door is taking the measurements based on the size of your dog. Sizes can vary for small dogs such as beagles and large ones such as Alsatians. The main door should be removed from its hinges and placed on a flat surface to facilitate the installation of the pet door. Using a pencil, the outline of the pet door is then traced onto the main door with the help of the door template, after which the hole is cut and the pet door along with its flap is attached using its hinges. It is quintessential to take precise measurements here, otherwise the door will be attached unevenly, or the pet will not be able to make its way through it.

It’s preferable to use the jigsaw to cut out the hole for a clean cut after which holes are drilled inside the corners. Once this is done, the fitting of the pet door is tested after placing it in the cut-out space with its flap. In case the door does not fit, use the saw to trim it until the door fits perfectly. Then, the frame of the pet door is placed into the space and tightened using screws which are drilled into the holes. Ensure that the door isn’t screwed very tightly. Learn more on how you can avail the limited offer of  free installation pet door.

Once the pet door is installed, the main door can be reattached to its initial position and the flap should be tested a few times manually in order to check if there are no loose ends before the pet begins to use it. With that done, the pet door is ready for use and your next job is to train your pet to use its new channel of entry of exit!